Pavement Sealing

• The pavement surface to be sealed is thoroughly cleaned using wire brooms and a 14-horse power blower
• Oil spots are scraped with wire brooms to remove accumulation of dirt and grease
• The oil spots, under certain circumstances but not always, are sealed with an oil spot primer
• Two applications of Tarconite sealer is applied at a minimum rate of .16 gallons per square yard
• Five pounds of sand is added to each gallon of Tarconite to provide a skid resistant surface
• Also, the additive Armorflex is included in the mix to enhance durability, blackness, and dry time
• The sealer is applied to asphalt via spray, squeegees, and brushes